lcd modules lcd modules lcd modules
lcd modules lcd modules lcd modules



Golden View Display Incorporated

   8460 Southwind Bay Circle
   Ft. Myers, FL 33908  USA
   Telephone:  239-332-8868
   Fax:   239-590-6066

sales@goldenviewdisplay.com

 

Golden View Display wants you to make an informed choice among our LCD products. The tech center provides you with most of the information you will need to understand liquid crystal displays.

Selecting LCD Display Technology

Here is a guideline to select a LCDs to meet your requirements in many aspects, such as cost, performance, and utility. We hope it can help you have a good understanding on the characteristics and properties of LCDs.

Here we categorize LCDs from different prospective of application as followings:


1.Table 1
Display type
Reflective
Transmissive
Transflective
Application
location
Bright
circumstance
as always
Dim or dusky
circumstance
Sometime in a bright circumstance, and
sometime in a dusky circumstance
Contrast
ratio
Very good
Very Good with backlit
Good in bright circumstance, good in
dusky circumstance if with a backlit
Power
consumption
small
high
Average
 
backlit
No need
necessary
Necessary in dusky circumstance
Cost factor
lower
lower
Higher (expensive polarizer )

 

2. Table 2
Display mode
negative
positive
character
White character in
black background
Black character in
white background
backlit
necessary
Depend upon the operation
circumstance (transflective
type)
cost
higher
lower
contrast
good
better

 

3.Table 3
Operational
mode
duty
TN
HTN
180 twist STN
220 twist STN
240 twist STN
1/1-1/8
 
 
 
 
1/8-1/16
 
●       
●         
●         
 
1/16-1/64
 
 
 
●    
●          
1/64-1/240
 
 
 
 
●          
1/240-1/480
 
 
 
 
●          

Note:
1). For a good contrast, the T-V curve should be steeper enough, as the duty increase, a steeper T-V curve is required. From TN to 240 twist STN, the steepness of T-V curve gets steeper and steeper.
2) From TN to 240 twist STN, the response time become slower and slower, but the contrast gets better and better, and view cone gets wider and wider if the duty is determined, but the cost of LCD gets higher and higher as well.

3) the “v”” is our recommendation for you.



4. Table 4
correlation
6 o’clock
12 o’clock
9 o’clock
3 o’clock
others
View from
up
 
●         
 
 
 
View from
down
●          
 
 
 
 
View from
left
 
 
●         
 
 
View from
right
 
 
 
●       
 
View from
other
direction
 
 
 
 

Note:
This is the most used term of view angle in LCD sector. We hope it will benefit
your communication during your business contact with us.
Please fill the form for your business contact based on the knowledge above.

Sample order requirement form

1)      Display mode
 a. Positive                                          b. Negative
2)      Display type
 a. Reflective              b. Transmissive              c. Transflective
3)  Operational mode
 a. TN  b. HTN   c. 180 twist STN  d. 220 twist STN  e. 240 twist STN
4)      Display mode( here only applicable for STN)
 a. yellow and green mode  b. blue mode  c. gray mode  e. FSTN mode
5)      Driving condition
Duty:     Bias:     Frequency:         Vop:
6)      Viewing angle
a.       6 o’clock  b. 12 o’clock  c. 9 o’clock  d. 3 o’clock  e. others
7)      Operation temperature Range
a.       Normal temperature ( 0 C-------------60C)
b.       Wide temperature  (-20C------------70C)
c.       Super wider temperature( -30C------80C)
8)      Connection method
a. Pin        b. Elastic rubber      c. Heal seal paper
9)      LCD thickness
a. 1.1x2 mm   b. 0.7X2 mm   c. 0.55x2 mm  d. 0.4x2 mm
10)   Colour
a. Monochrome    b. Printing colour       c. Multi-colour( CIE mixing colour)
11)   LCM
a. COB       b. TAB        c. COG       d. COF
After you fill out this form, we can design a LCD or LCM perfectly meet your all
kinds of requirement, pls take into consideration of cost, performance, and utility
as an integral consideration.
 
Attachment:

LCD performance terms.

1. Contrast: the comparison of black state and the white state, as indicated as a parameter of Ton/Toff.( T: abbrev. Transmittance)
2. Response time: including switch on time and switch off time, it is vital for displaying a moving picture, the shorter, the better.
3. View angle: the range of being readable of the displayed information (Cr>3), please keep in mind the contrast is a view angle dependent parameter.
4.Operation temperature range: a temperature range in which a LCD can normally display information.
5.Hue: the color of LCD in off-state.
6.
Now we present you a guideline to select a LCDs to meet your requirements in
many aspect, such as cost, performance, and utility, etc, hope it can help you
have a good understanding on the characteristics and property of a LCDs.
Here we categorize LCDs from different prospective of application as
followings:

1.Table 1

Display type
Reflective
Transmissive
Transflective
Application
location
Bright
circumstance
as always
Dim or dusky
circumstance
Sometime in a bright circumstance, and
sometime in a dusky circumstance
Contrast
ratio
Very good
Very Good with backlit
Good in bright circumstance, good in
dusky circumstance if with a backlit
Power
consumption
small
high
Average
 
backlit
No need
necessary
Necessary in dusky circumstance
Cost factor
lower
lower
Higher (expensive polarizer )

2. Table 2

Display mode
negative
positive
character
White character in
black background
Black character in
white background
backlit
necessary
Depend upon the operation
circumstance (transflective
type)
cost
higher
lower
contrast
good
better

3.Table 3

Operational
mode
duty
TN
HTN
180 twist STN
220 twist STN
240 twist STN
1/1-1/8
 
 
 
 
1/8-1/16
 
●       
●         
●         
 
1/16-1/64
 
 
 
●    
●          
1/64-1/240
 
 
 
 
●          
1/240-1/480
 
 
 
 
●          

Note:
1). For a good contrast, the T-V curve should be steeper enough, as the duty increase,
a steeper T-V curve is required. From TN to 240 twist STN, the steepness of T-V curve
gets steeper and steeper.
2) From TN to 240 twist STN, the response time become slower and slower, but the
contrast gets better and better, and view cone gets wider and wider if the duty is
determined, but the cost of LCD gets higher and higher as well.
3) the “v”” is our recommendation for you.

4. Table 4

correlation
6 o’clock
12 o’clock
9 o’clock
3 o’clock
others
View form
up
 
●         
 
 
 
View from
down
●          
 
 
 
 
View from
left
 
 
●         
 
 
View from
right
 
 
 
●       
 
View from
other
direction
 
 
 
 

Note:
Hereby inform you the most used term of view angle in LCD sector, hope can benefit
your communication during your business contact.
Pls fill up the form for your business contact based the knowledge above.

Sample order requirement form

1)      Display mode
 a. Positive                                          b. Negative
2)      Display type
 a. Reflective              b. Transmissive              c. Transflective
3)  Operational mode
 a. TN  b. HTN   c. 180 twist STN  d. 220 twist STN  e. 240 twist STN
4)      Display mode( here only applicable for STN)
 a. yellow and green mode  b. blue mode  c. gray mode  e. FSTN mode
5)      Driving condition
Duty:     Bias:     Frequency:         Vop:
6)      Viewing angle
a.       6 o’clock  b. 12 o’clock  c. 9 o’clock  d. 3 o’clock  e. others
7)      Operation temperature Range
a.       Normal temperature ( 0 C-------------60C)
b.       Wide temperature  (-20C------------70C)
c.       Super wider temperature( -30C------80C)
8)      Connection method
a. Pin        b. Elastic rubber      c. Heal seal paper
9)      LCD thickness
a. 1.1x2 mm   b. 0.7X2 mm   c. 0.55x2 mm  d. 0.4x2 mm
10)   Colour
a. Monochrome    b. Printing colour       c. Multi-colour( CIE mixing colour)
11)   LCM
a. COB       b. TAB        c. COG       d. COF
After you fill out this form, we can design a LCD or LCM perfectly meet your all
kinds of requirement, pls take into consideration of cost, performance, and utility
as an integral consideration.
 
Attachment:

LCD performance term.

1. Contrast: the comparison of black state and the white state, as indicated as a
parameter of Ton/Toff.( T: abbrev. Transmittance)
2. Response time: including switch on time and switch off time, it is vital for
displaying a moving picture, the shorter, the better.
3. View angle: the range of being readable of the displayed information (Cr>3),
pls keep in mind the contrast is a view angle dependence parameter.
4.Operation temperature range: a temperature range in which a LCD can normally
display information.
5.Hue: the color of LCD in off-state.
6.lifetime: the time of LCD can normally operate.
7.Operation voltage: the optimal voltage to drive a LCD to display information perfectly.
:
 
 
 
 
 
 
 
lcd modules
lcd modules  
lcd modules lcd modules Liquid Crystal Displays

Home  |  Our Factory  |  Contact  |  Standard LCD Glass  |  Module Numbering System  | Character LCD Module  | Graphic LCD Module  | Packaging Information  | LCD Controllers  | Intro to Liquid Crystal Displays  | Selecting a display type  | Driving your display  | Font Selection  | Troubleshooting  | Handling Precautions for LCD  | Handling Precautions for LCD Modules

Copyright © Golden View Display 2014
Design by swflwebmaster